| 1.00 | Implement
Layer 2 Technologies |
|
| 1.10 | Implement Spanning Tree
Protocol (STP) |
|
| (a) 802.1d |
|
| (b) 802.1w |
|
| (c) 801.1s |
|
| (d) Loop guard |
|
| (e) Root guard |
|
| (f) Bridge protocol
data unit (BPDU) guard |
|
| (g) Storm control |
|
| (h) Unicast flooding |
|
| (i) Port roles, failure
propagation, and loop guard operation |
|
| 1.20 | Implement VLAN and VLAN Trunking Protocol
(VTP) |
|
| 1.30 | Implement trunk and
trunk protocols, EtherChannel, and load-balance |
|
| 1.40 | Implement Ethernet technologies |
|
| (a) Speed and duplex |
|
| (b) Ethernet, Fast
Ethernet, and Gigabit Ethernet |
|
| (c) PPP over
Ethernet (PPPoE) |
|
| 1.50 | Implement Switched Port
Analyzer (SPAN), Remote Switched Port Analyzer (RSPAN), and flow
control |
|
| 1.60 | Implement Frame Relay |
|
| (a) Local Management
Interface (LMI) |
|
| (b) Traffic shaping |
|
| (c) Full mesh |
|
| (d) Hub and spoke |
|
| (e) Discard eligible
(DE) |
|
| 1.70 | Implement High-Level
Data Link Control (HDLC) and PPP |
|
| 2.00 | Implement IPv4 |
|
| 2.10 | Implement IP version 4
(IPv4) addressing, subnetting, and variable-length subnet masking
(VLSM) |
|
| 2.20 | Implement IPv4
tunneling and Generic Routing Encapsulation (GRE) |
|
| 2.30 | Implement IPv4 RIP version 2 (RIPv2) |
|
| 2.40 | Implement IPv4 Open
Shortest Path First (OSPF) |
|
| (a)
Standard OSPF areas |
|
| (b)
Stub area |
|
| (c)
Totally stubby area |
|
| (d)
Not-so-stubby-area (NSSA) |
|
| (e)
Totally NSSA |
|
| (f)
Link-state advertisement (LSA) types |
|
| (g) Adjacency on a
point-to-point and on a multi-access network |
|
| (h) OSPF graceful
restart |
|
| 2.50 | Implement IPv4 Enhanced
Interior Gateway Routing Protocol (EIGRP) |
|
| (a) Best path |
|
| (b)
Loop-free paths |
|
| (c)
EIGRP operations when alternate loop-free paths are available, and when
they are not available |
|
| (d)
EIGRP queries |
|
| (e)
Manual summarization and autosummarization |
|
| (f) EIGRP stubs |
|
| 2.60 | Implement IPv4
Border Gateway Protocol (BGP) |
|
| (a) Next hop |
|
| (b)
Peering |
|
| (c)
Internal Border Gateway Protocol (IBGP) and External Border Gateway
Protocol (EBGP) |
|
| 2.70 | Implement policy
routing |
|
| 2.80 | Implement Performance
Routing (PfR) and Cisco Optimized Edge Routing (OER) |
|
| 2.90 | Implement filtering, route redistribution, summarization,
synchronization, attributes, and other advanced features |
|
| 3.00 | Implement IPv6 |
|
| 3.10 | Implement IP
version 6 (IPv6) addressing and different addressing types |
|
| 3.20 | Implement IPv6 neighbor
discovery |
|
| 3.30 | Implement basic IPv6
functionality protocols |
|
| 3.40 | Implement tunneling
techniques |
|
| 3.50 | Implement OSPF version 3
(OSPFv3) |
|
| 3.60 | Implement EIGRP version
6 (EIGRPv6) |
|
| 3.70 | Implement filtering and
route redistribution |
|
| 4.00 | Implement MPLS Layer 3 VPNs |
|
| 4.10 | Implement Multiprotocol
Label Switching (MPLS) |
|
| 4.20 | Implement Layer 3 virtual private networks (VPNs) on
provider edge (PE), provider (P), and customer edge (CE) routers |
|
| 4.30 | Implement virtual
routing and forwarding (VRF) and Multi-VRF Customer Edge (VRF-Lite) |
|
| 5.00 | Implement IP Multicast |
|
| 5.10 | Implement Protocol
Independent Multicast (PIM) sparse mode |
|
| 5.20 | Implement Multicast Source Discovery
Protocol (MSDP) |
|
| 5.30 | Implement interdomain
multicast routing |
|
| 5.40 | Implement PIM Auto-Rendezvous Point (Auto-RP), unicast
rendezvous point (RP), and bootstrap router (BSR) |
|
| 5.50 | Implement
multicast tools, features, and source-specific multicast |
|
| 5.60 | Implement IPv6 multicast, PIM, and related multicast
protocols, such as Multicast Listener Discovery (MLD) |
|
| 6.00 | Implement Network Security |
|
| 6.01 | Implement access
lists |
|
| 6.02 | Implement Zone Based
Firewall |
|
| 6.03 | Implement Unicast
Reverse Path Forwarding (uRPF) |
|
| 6.04 | Implement IP
Source Guard |
|
| 6.05 | Implement authentication, authorization, and accounting
(AAA) (configuring the AAA server is not required, only the client-side
(IOS) is configured) |
|
| 6.06 | Implement Control Plane
Policing (CoPP) |
|
| 6.07 | Implement Cisco IOS
Firewall |
|
| 6.08 | Implement Cisco IOS
Intrusion Prevention System (IPS) |
|
| 6.09 | Implement Secure Shell (SSH) |
|
| 6.10 | Implement 802.1x |
|
| 6.11 | Implement NAT |
|
| 6.12 | Implement routing
protocol authentication |
|
| 6.13 | Implement device access
control |
|
| 6.14 | Implement security
features |
|
| 7.00 | Implement Network Services |
|
| 7.10 | Implement Hot Standby
Router Protocol (HSRP) |
|
| 7.20 | Implement Gateway Load
Balancing Protocol (GLBP) |
|
| 7.30 | Implement Virtual
Router Redundancy Protocol (VRRP) |
|
| 7.40 | Implement Network Time Protocol (NTP) |
|
| 7.50 | Implement DHCP |
|
| 7.60 | Implement Web Cache
Communication Protocol (WCCP) |
|
| 8.00 | Implement Quality of Service (QoS) |
|
| 8.10 | Implement Modular QoS
CLI (MQC) |
|
| (a)
Network-Based Application Recognition (NBAR) |
|
| (b) Class-based weighted fair queuing (CBWFQ), modified
deficit round robin (MDRR), and low latency queuing (LLQ) |
|
| (c)
Classification |
|
| (d)
Policing |
|
| (e)
Shaping |
|
| (f)
Marking |
|
| (g)
Weighted random early detection (WRED) and random early detection (RED) |
|
| (h)
Compression |
|
| 8.20 | Implement Layer 2 QoS:
weighted round robin (WRR), shaped round robin (SRR), and policies |
|
| 8.30 | Implement link
fragmentation and interleaving (LFI) for Frame Relay |
|
| 8.40 | Implement generic
traffic shaping |
|
| 8.50 | Implement Resource
Reservation Protocol (RSVP) |
|
| 8.60 | Implement Cisco
AutoQoS |
|
| 9.00 | Troubleshoot a Network |
|
| 9.10 | Troubleshoot
complex Layer 2 network issues |
|
| 9.20 | Troubleshoot
complex Layer 3 network issues |
|
| 9.30 | Troubleshoot a
network in response to application problems |
|
| 9.40 | Troubleshoot network services |
|
| 9.50 | Troubleshoot network
security |
|
| 10.00 | Optimize the Network |
|
| 10.01 | Implement syslog
and local logging |
|
| 10.02 | Implement IP Service
Level Agreement SLA |
|
| 10.03 | Implement NetFlow |
|
| 10.04 | Implement SPAN, RSPAN,
and router IP traffic export (RITE) |
|
| 10.05 | Implement Simple Network Management Protocol
(SNMP) |
|
| 10.06 | Implement Cisco IOS
Embedded Event Manager (EEM) |
|
| 10.07 | Implement Remote
Monitoring (RMON) |
|
| 10.08 | Implement FTP |
|
| 10.09 | Implement TFTP |
|
| 10.10 | Implement TFTP server
on router |
|
| 10.11 | Implement Secure Copy
Protocol (SCP) |
|
| 10.12 | Implement HTTP and
HTTPS |
|
| 10.13 | Implement Telnet |
